Parts

TRP

TRP Bleed Funnel

Service your TRP brakes like a pro with our new Bleed Funnel. Compatibility Chart   Brake Model Compatibility Quadiem Series Yes Trail Series Yes Slate Series NO* Hylex Series Yes HY/RD Series Yes Hydro TT series Yes Dash...

TRP

TRP DH-R EVO Brakes

TRP DH-R EVO Disc Brake Are your brakes holding you back, fading, over-heating, constant bleeding?  TRP has the answer to our braking needs!  These are some of the most powerful and well built DH MTB brakes on the market which are perfect for...

TRP

TRP Hose Cutter And Barb Press

Make cutting hoses and pressing in barbs as easy as ever with our razor sharp hose cutter with integrated barb press.

TRP

TRP Mineral Oil

For all TRP and Tektro hydraulic braking systems. Non-corrosive mineral oil. Increased Boiling point to 270 degrees C Decreased viscosity for better fluid flow Volumes: 1000ml or 100ml

TRP

TRP Semi-metalic Brake Pads

A pad that splits the difference between our blue and copper compounds giving a nice balance of modulation and long lasting wear. Best for those looking for a quiet braking experience and a subtle onset of power. Semi-metallic organic compound Red color...

TRP

TRP Trail EVO Brakes

Born from technology proven in World Cup DH and tuned for the demands of Trail bikes and E-MTB’s, the Trail EVO takes modulation and braking power to an entirely new level of control. New ergonomic lever-blade, newly formulated brake pad compounds,...

Tusk

Tusk 1.40"-1.60" Rim Lock

Special Notes: *Rim lock size recommendations are based on stock wheel sizes. We recommend you double check your rim size before ordering since aftermarket wheel sizes may vary. The size is generally stamped on the rim. Cast Aluminum to reduce...

Tusk

Tusk Billet Rim Lock - 1.85

  *Rim lock size recommendations are based on stock wheel sizes. We recommend you double check your rim size before ordering since aftermarket wheel sizes may vary. The size is generally stamped on the rim. Cast Aluminum to reduce corrosion...

Tusk Chub 1-1/8" Big Bar KTM Bend (Black)

Details Oversized 1-1/8" handlebar is extremely strong and lighter than standard bars. Made from 7075 T-6 aluminum with a shot-peened anodized corrosion resistant finish. Features chemically applied graphics that won't peel off. Available in black.

Tusk

Tusk Heavy Duty Tube - 70/100-19

The Tusk Heavy Duty 2mm Motorcycle Tube is the perfect replacement for your leaky or punctured tube. This tube is thicker than the stock 1-1.3mm tube found in most bikes. Made from a quality butyl rubber, this tube maintains strength and durability while...

Vonkat

Vonkat TENfive V2 Shock for Sur-Ron/Segway/Talaria (450)

The 2nd version of the TENfive is here, with a host of new features to enhance its already rock-solid performance! The Vonkat TENfive V2 shock is made specifically for Sur-Ron, E Ride Pro, and Talaria lightweight electric motorcycles. Internally, the...

Vonkat

Vonkat TENfive V2 Shock for Sur-Ron/Segway/Talaria (525)

The 2nd version of the TENfive is here, with a host of new features to enhance its already rock-solid performance! The Vonkat TENfive V2 shock is made specifically for Sur-Ron, E Ride Pro, and Talaria lightweight electric motorcycles. Internally, the...

Warp 9

Warp 9 Light Switch

Specifications: Light Button kit with Blue button Turn on / off your oem headlight or any other aftermarket light that plugs into the oem harness Plugs into factory wiring harness, No cutting or splicing A Perfect companion to our Horn Button Mounts to...

Warp 9

Warp 9 .75 inch Linkage Riser - Magnesium

Standard Features (V2 and V3) Hardened Stainless Steel Bushings Forged 7075T6 aluminum More material in the main pivot bearing area Abec 5 bearings Pressed in rubber seals Includes new Stainless Steel bushings for a precision, no-slop fit Available in...

Warp 9

Warp 9 18 inch Rear Wheel w/ 58t

Black rims, Black Spokes, Red hub, Red nipples

Warp 9

Warp 9 21 inch Front Wheel w/ 220 Rotor for RFN Ares Rally Pro and Beta Explorer

Black wheel, Black hub, Silver spokes, Silver nipples, 220 rotor, standard bolts. Needs wheel spacers, and caliper bracket to fit RFN Ares Rally Pro and Beta Explorer properly. (listed above as options)

Warp 9

Warp 9 21 inch Front Wheel w/ 220 Rotor-Vanilla

Black wheel, Black hub, Silver spokes, Silver nipples, 220 rotor, standard bolts.

Warp 9

Warp 9 21 inch Wheel (Silver on Silver)

Warp 9 is the only company to offer wheels complete with rotors and sprocket Anodized 7000 series aluminum rim Stainless steel spokes and aluminum nipples 7075 T6 aluminum hub Stainless steel brake rotor included 7075 T6 aluminum sprocket...

Warp 9

Warp 9 220mm Brake Rotor Adapter

If you upgrade your front brake rotor to 220mm you will need to install a +17mm post mount adapter to move your brake caliper into the correct position.      Converts 203mm Post Mount Forks to Use 220mm Rotors Includes 4 new...

Warp 9

Warp 9 220mm Fixed Rotor - OEM Rear

203mm x 1.8mm size: Surron Light Bee are 203mm diameter Rotors from the factory. The 203mm Rotor does not need a caliper bracket and is a one piece 1.8mm thick rotor same as factory thickness. 220mm x 1.8mm Size: this is an upgraded...

Warp 9

Warp 9 50T Sprocket For Ultra Bee - Black

Made from 7075-T6 aluminum 520 OEM chain size Color Black Additional chain links not included

Warp 9

Warp 9 54T Sprocket For Ultra Bee - Black

Made from 7075-T6 aluminum 520 OEM chain size Color Black Additional chain links not included

Warp 9

Warp 9 58T Sprocket For Ultra Bee - Black

Made from 7075-T6 aluminum 520 OEM chain size Color Black Additional chain links not included

Warp 9

Warp 9 Adjustable Kickstand

An Adjustable Kickstand for the surrons Spring Pin is shorter than oem kickstand to allow for wider tires and more clerance Mid Adjustment fits Surron/Segway/Talaria with 19” / 16” wheel combo’s Full Adjustment Fits...

Warp 9

Warp 9 Bar Mount

SURRON / SEGWAY / TALARIA  TRANSFORMER DIRECT BAR MOUNT STEM CNC Machined from 7075T6 aluminum Fits MX bars with the included 28.6mm shims Fits Oem and Warp 9 Bars in 31.8m size Moves Bars 10mm forward OEM height in low position Add the included...

Warp 9

Warp 9 Boost Spacer

Description FRONT WHEEL BOOST SPACER, 5MM THICKNESS USED ON BUT NO LIMITED TO THESE FORKS. FOX 40, EXT FERRO, MANITOU DORADO. INCLUDES QTY 6 M5 X 16MM HIGH GRADE STEEL BOLTS BOLTS HAVE BLUE THREAD LOCK APPLIED, WITH BUTTON HEAD TORX 25 OPTIONAL BURNT...

Warp 9

Warp 9 Front Fender Adapter For Warp 9 Stemlock For Light Bee and Sting

Front Fender Adapter Allows you to mount a OEM Style Surron front fender to a Warp 9 Steerlock. Will not work on Conventional forks with cross brace such as Fox 40, RST, DVO etc Includes 2 tapered head screws to mount adapter to warp 9 Steerlock To...

Warp 9

Warp 9 Handlebar for Surron and Talaria - Gold

31.8mm center clamp size 9 degree backsweep 5 degree upsweep 770mm Width 80mm / 3” rise Full bead blast for a durable finish  and antislip in the clamps Anodized finish with lasered logo  Centering and alignment marks lasered into the...

Warp 9

Warp 9 Handlebars - Multiple Colors

Specifications: 31.8mm center clamp size 9 degree backsweep 5 degree upsweep 770mm Width 80mm / 3” rise Full bead blast for a durable finish  and antislip in the clamps Anodized finish with lasered logo  Centering and alignment marks...

Warp 9

Warp 9 High Output Headlight Kit

Description Compatibility: Designed to fit the Surron Light Bee and Talaria Sting MX3/MX4 models. Lighting Technology: Equipped with a high-quality Made in USA Diode Dynamics Series 2 Pro. Backlight Feature: Offers a striking blue...

Warp 9

Warp 9 Lockdown Axle Blocks

Specifications:   Titanium captive adjustment bolts ( 10mm ) Titanium axle bolt backing plate is cut to insert into the axle which means you never have to carry an Allen wrench again to remove your axle. All you need is a 17mm wrench ...

Warp 9

Warp 9 Rear Disk Guard for Surron - Black

Specifications: • Protect your thin rear Rotor from Rocks and Stumps• Designed larger to Protect 203mm stock size and 220mm Rotors• Includes spacers and longer bolts to relocate the caliper for a 220mm rotor...

Warp 9

Warp 9 Rear Rotor Guard For Talaria - Black

Protect your thin rear Rotor from Rocks and Stumps Designed larger to Protect 203mm stock size and 220mm Rotors Includes spacers and longer bolts to relocate the caliper for a 220mm rotor setup Rear spacer catch is slot cut to allow for easier rear...

Warp 9

Warp 9 Rear Suspension Linkage Riser

Specification: Made from 7075T6 Billet Aluminum Weights less than Other Aftermarket Risers Available in Red, Blue or Black

Warp 9

Warp 9 Sprockets

Specification:  Material is aluminum 7075-T6 Color Black Additional chain links not included Refer to table below for chain length needed:   Sprocket Size (Teeth) Chain Size 42 Tooth 104   link 48 Tooth (oem size)...

Warp 9

Warp 9 Sprockets For RFN/Beta

Specification:  Material is aluminum 7075-T6 Color Black Additional chain llength is required for 60t and longer